AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

Regular Price
$20.99
Sale Price
$20.99
Regular Price
$20.99
Sold Out
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

Color: White

Only 47 left!

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

PETG (and PETG+) is a great build material for #D Printing made from the same type of plastics used in plastic bottles. It is one of the most popular 3D printing filaments and has high impact strength, low haze (also can print true clear) and is an easy material to print with. Overall PETG can survive heated elements more than PLA, and is a great 'graduating' material from PLA. While not explicitly required, a heated bed is highly recommended.

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Derived from 100% Virgin (Grade-A) non-toxic pellets
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).

Check out our other lines of Ambrosia Filament!

 ASA ASA Sparkle ABS / ABS+ PETG PLA

Ambrosia Filament's Recommended Print Settings for our ASA filament:

Attribute Accepted Value(s) [Our Recommended Value]
Extruder Temperature 210-230 Degrees Celsius [220]
Heated Bed 0-70C Degrees Celsius [65]
Build Surface PEI, Glass, Buildtak, or similar surface [Textured PEI] - use separating layer if printing on smooth PEI!
Cooling Fan 0-70% range varies by cooling capabilities
Environmental Temperatures 15-50C [30C]
Soluble Support Materials

 

Technical Specifications for our ASA Filament:

 Physical Properties Test Methodology Values
Density ISO1183 1.27-1.28 g/cm^3
Melt Flow Rate (250C/2.16KG) ISO 1133 8-12 g/10min
Mechanical Properties Test Methodology Values
Tensile Strength
ISO 527 41-45 Mpa
Elongation at break ISO 527 10-12%
Flexural Modulus ISO 527 1400-1500 Mpa
Flexural Strength ISO 178 64-66 Mpa
Impact Strength ISO 180 5-6 KJ/m^2
Thermal Dynamic Properties Test Methodology Values
HDT@ 0.455 MPa(66 psi)
ISO 75 68C
Continuous Use Temperature IEC 60216 65C

 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

Feed your Printer the Filament of the Gods