PC

Ambrosia Filament's line of Polycarbonate filaments are designed to be printable without sacrifice. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

Polycarbonate filament requires a heated bed, chamber and printing at higher temperatures than other common filaments.

Feed your Printer the Filament of the Gods.

The filament both provides better mechanical properties and heat resistance than ABS with printability only marginally tougher. 

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).