Über ABS (ABS+) - (Acrylonitrile Butadiene Styrene)

Ambrosia Filament's line of Über ABS (ABS+) filament is derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

This filament is actually where Ambrosia originally derived its "butter" moniker found on every recyclable spool we sell, as you'll find, it prints like butter. This ABS+ is a composite material derived from 80% pure virgin ABS and 20% additives (pssst. it's PETG) and maintains technical properties, including the ability to withstand heat, similar to ABS. This filament performs well in high speed printing, and even is able to be printed without an enclosure using our Makers Mistress bed adhesive (it is still recommended to print in an enclosure). A heated bed is required. 

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Derived from 100% Virgin (Grade-A) non-toxic pellets
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight:  

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (GET A LINK).

Ambrosia Filament's Recommended Print Settings for our ABS+ filament:

Attribute Accepted Value(s) [Our Recommended Value]
Extruder Temperature 225-250 Degrees Celsius [235]
Heated Bed 75-110 Degrees Celsius [100]
Build Surface PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan 0-70% range varies by cooling capabilities
Environmental Temperatures 30-100C [40C]
Soluble Support Materials HIPS

 

Technical Specifications for our ABS+ Filament:

 Physical Properties Test Methodology Values
Density ISO1183 1.08-1.1 g/cm^3
Melt Flow Rate (250C/2.16KG) ISO 1133 2-5 g/10min
Mechanical Properties Test Methodology Values
Tensile Strength
ISO 527 33-37 Mpa
Elongation at break ISO 527 9-15%
Flexural Modulus ISO 527 1500-1650 Mpa
Flexural Strength ISO 178 65-67 Mpa
Impact Strength ISO 180 12-13.5 KJ/m^2
Thermal Dynamic Properties Test Methodology Values
HDT@ 0.455 MPa(66 psi)
ISO 75 85C

 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.
Filter
Save $5.25
More Color(s) available

color:

AMBROSIA Über ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament ABS+

Regular Price
$15.74
Sale Price
$15.74
Regular Price
$20.99
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

color: