AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament
- Regular Price
- $16.79
- Sale Price
- $16.79
- Regular Price
- $20.99
- Unit Price
- Translation missing: en.general.accessibility.unit_price_separator
Feed your Printer the Filament of the Gods.
Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.
PETG (and PETG+) is a great build material for #D Printing made from the same type of plastics used in plastic bottles. It is one of the most popular 3D printing filaments and has high impact strength, low haze (also can print true clear) and is an easy material to print with. Overall PETG can survive heated elements more than PLA, and is a great 'graduating' material from PLA. While not explicitly required, a heated bed is highly recommended.
- Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
- Derived from 100% Virgin (Grade-A) non-toxic pellets
- Diameter: 1.75mm (+/-0.03mm)
- Filament Net Weight: 1KG
- Spool Weight:
The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).
Check out our other lines of Ambrosia Filament!
| ASA | ASA-CF | ASA Sparkle | ASA Dolos | ABS+ | PETG | PLA |
| PC-ABS | PC-CF | TPU | ABS Matte | ASA-GF |
Ambrosia Filament's Recommended Print Settings for our PETG filament:
| Attribute | Accepted Value(s) [Our Recommended Value] |
| Extruder Temperature | 225-260 Degrees Celsius [250] |
| Heated Bed | 65-80C Degrees Celsius [80] |
| Build Surface | PEI, Glass, Buildtak, or similar surface [Textured PEI] - use separating layer if printing on smooth PEI! |
| Cooling Fan | 0-70% range varies by cooling capabilities |
| Environmental Temperatures | 15-50C [30C] |
| Soluble Support Materials |
Technical Specifications for our ASA Filament:
| Physical Properties | Test Methodology | Values |
| Density | ISO1183 | 1.27-1.28 g/cm^3 |
| Melt Flow Rate (250C/2.16KG) | ISO 1133 | 8-12 g/10min |
| Mechanical Properties | Test Methodology | Values |
| Tensile Strength |
ISO 527 | 41-45 Mpa |
| Elongation at break | ISO 527 | 10-12% |
| Flexural Modulus | ISO 527 | 1400-1500 Mpa |
| Flexural Strength | ISO 178 | 64-66 Mpa |
| Impact Strength | ISO 180 | 5-6 KJ/m^2 |
| Thermal Dynamic Properties | Test Methodology | Values |
| HDT@ 0.455 MPa(66 psi) |
ISO 75 | 68C |
| Continuous Use Temperature | IEC 60216 | 65C |
Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.