AMBROSIA TPU 95 Filament of the Gods - 1KG Cardboard Spools Premium 3D Printing Filament TPU95 - West3D 3D Printing Supplies - AMBROSIA FILAMENT

AMBROSIA TPU 95 Filament of the Gods - 1KG Cardboard Spools Premium 3D Printing Filament TPU95

$23.99
$23.99
Sold Out

Color: Black

Ambrosia Filament's line of TPU95 (Thermoplastic Polyurethane with shore hardness of 95A) is a rubber like material that offers flexibility and incredible layer adhesion - allowing you to use for both industrial and hobby based activities. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Feed your Printer the Filament of the Gods.

TPU is a wonderful printing material if you're looking for something durable and flexible. We recommend printing TPU generally at consistent speed and temperature on a heated textured bed. 

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

 ASA ASA-CF ASA Sparkle ASA Dolos ABS+ PETG PLA

 PLA Dolos

 PC-ABS PC-CF TPU ABS Matte ASA-GF

 

Ambrosia Filament's Recommended Print Settings for our TPU filament:

Attribute Accepted Value(s) [Our Recommended Value]
Extruder Temperature 190-220 Degrees Celsius [210]
Heated Bed 50-65 Degrees Celsius [60]
Build Surface Textured PEI or other surface with with separation layer
Cooling Fan 0-70% range varies by cooling capabilities
Environmental Temperatures 40-80C [35C]


Technical Specifications for our TPU Filament:

 Physical Properties Test Methodology Values
Density ISO 1183 12.2-1.25g/cm3
Melt Flow Rate (250C/2.16KG) ISO 1133 6-10g/10min
Moisture Absorption ISO 62 <0.5%
Mechanical Properties Test Methodology Values
Tensile Strength ISO 527 27-28Mpa
Elongation at break ISO 527 800-1000%
Flexural Modulus ISO 527 6-7Mpa
Flexural Strength ISO 178 7-9Mpa
Impact Strength ISO 180 NB
Thermal Dynamic Properties Test Methodology Values
HDT@ 0.455 MPa(66 psi) ISO 75 95C 

 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

Feed your Printer the Filament of the Gods