AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

Regular Price
$17.99
Sale Price
$17.99
Regular Price
$23.99
Sold Out
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

Color: Galactic Super Blue

Only 6 left!

 

Ambrosia Filament's line of ASA Galactic (Sparkle) filament is derived from 100% Virgin Grade-A Non-Toxic pellets. This filament has glitter infused into the filament that results in a beautiful sparkle effect. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.

Want ASA without glitter? We have it here!

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required. ASA Galactic filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG). 

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Derived from 100% Virgin (Grade-A) non-toxic pellets
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight: 

 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

 ASA ASA-CF ASA Sparkle ASA Dolos ABS / ABS+ PETG PLA

 PLA Dolos

PC-ABS PC-CF TPU


 

 

Ambrosia Filament's Recommended Print Settings for our ASA filament:

Attribute Accepted Value(s) [Our Recommended Value]
Extruder Temperature 230-260 Degrees Celsius [250]
Heated Bed 100-115 Degrees Celsius [110]
Build Surface PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan 0-70% range varies by cooling capabilities
Environmental Temperatures 40-120C [45C]
Soluble Support Materials HIPS


Technical Specifications for our ASA Filament:

 Physical Properties Test Methodology Values
Density ISO1183 1.08-1.09 g/cm^3
Melt Flow Rate (250C/2.16KG) ISO 1133 20-25 g/10min
Mechanical Properties Test Methodology Values
Tensile Strength ISO 527 42-45 Mpa
Elongation at break ISO 527 9-12%
Flexural Modulus ISO 527 1200-1400 Mpa
Flexural Strength ISO 178 75-79 Mpa
Impact Strength ISO 180 19-20 KJ/m^2
Thermal Dynamic Properties Test Methodology Values
HDT@ 0.455 MPa(66 psi) ISO 75 88C


 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

Feed your Printer the Filament of the Gods