AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

Regular Price
$19.99
Sale Price
$19.99
Regular Price
$20.99
Sold Out
Unit Price
Translation missing: en.general.accessibility.unit_price_separator 

Color: Pink

Only 13 left!

Ambrosia Filament's line of PLA is part of our Low Calorie line of filament, no additives just butter smooth printing.

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

PLA is most hobbyist makers material of choice for 3D printing. A bio-degradable plastic derived from renewable resources (such as corn... I know we say our filament is low calorie, but don't eat it - your printer is the only machine that should injest our filament!) it is one of the easiest materials to print with, with a relatively low melting point and is able to be printed without a heated bed. Printing with PLA is typically odorless, or when it smells gives of a 'sweet' aroma, and emits less harmful fumes than some other 3D printing materials, making it a safer option for enclosed spaces without proper ventilation. 

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Derived from 100% Virgin (Grade-A) non-toxic pellets
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).

Check out our other lines of Ambrosia Filament!

 ASA ASA Sparkle ABS / ABS+ PETG PLA

 

Ambrosia Filament's Recommended Print Settings for our PLA filament:

Attribute Accepted Value(s) [Our Recommended Value]
Extruder Temperature 190-220 Degrees Celsius [210]
Heated Bed 0-65C Degrees Celsius [60]
Build Surface PEI, Glass, Painters Tape, Buildtak, or similar surface [Smooth PEI]
Cooling Fan 50-100% range varies by cooling capabilities
Environmental Temperatures 15-40C [25C]
Soluble Support Materials PVA, BVOH

 

Technical Specifications for our ASA Filament:

 Physical Properties Test Methodology Values
Density ISO1183 1.25-1.26 g/cm^3
Melt Flow Rate (250C/2.16KG) ISO 1133 4-8 g/10min
Mechanical Properties Test Methodology Values
Tensile Strength
ISO 527 45-49 Mpa
Elongation at break ISO 527 13-15.5%
Flexural Modulus ISO 527 1000-1100 Mpa
Flexural Strength ISO 178 69-75 Mpa
Impact Strength ISO 180 4.5-5 KJ/m^2
Thermal Dynamic Properties Test Methodology Values
HDT@ 0.455 MPa(66 psi)
ISO 75 53C
Continuous Use Temperature IEC 60216 50C

 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

Feed your Printer the Filament of the Gods